TOGEKISS - Pokémon Papercraft

Name: Togekiss
Type: Fairy/Flying
Species: Jubilee Pokémon
Height: 1.5 m (4'11")
Weight: 38.0 kg (83.8 lbs.)
Interesting Facts: Togekiss is a white, avian Pokémon with an ovoid body. While its feet are small and situated closely together, its wings are broad and triangular. Red and blue triangular markings over its underside, and it has a short tail consisting of three feathers. On the back of its head are three spikes: a red tipped on the right, a blue tipped one on the left, and a pure white one in the middle. Togekiss has a relatively flat face and small, black eyes. This Pokémon is rarely seen, only appearing in peaceful areas. When it is seen or visits respectful people, it showers gifts of blessings and kindness.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 29.9 cm/11.8 in
Depth: 19.7 cm/7.8 in
No. of Pages: 7
No. of Pieces: 75
Level: Medium

NOTES: Start the model at the top of the head, follow the numbers and the istructions and close at the tail. The only part that can offer some trouble on this one is joining the wings with the body, since they are quite big. If you glue the two first chest pieces to it, will make it easier. It stands on it's own, just be careful while placing the feet so they match the pdo and the picture. If it won't stand, add some weight, there should be an opening, since the tail should be only glued after it's standing. To finish it, glue the feathers.

About the wings, up until a point (12), the build with both the wings is the same, after that, if you want the wings as shown on the picture, follow the red numbers, if you want the ones as shown on the pdo, use the black number.

DOWNLOAD

STARLY- Pokémon Papercraft

Name: Starly
Type: Normal/Flying
Species: Starling Pokémon
Height: 0.3 m (1'00")
Weight: 2.0 kg (4.4 lbs.)
Interesting Facts: Although capable of flapping its wings powerfully, Starly is weak and inconspicuous when alone. It forms large flocks to protect itself. However, individuals will begin to bicker if the group becomes too large. This Pokémon’s cry is harsh, and its singing can become annoying. Starly congregates in mountains and fields, where it hunts for bug Pokémon.

THE PAPER MODEL
Height: 16.8 cm/ 6.6 in
Width: 16.9 cm/ 6.7 in
Depth: 30.2 cm/ 11.9 in
No. of Pages: 5
No. of Pieces: 40
Level: Medium

NOTES: The model is built in two main parts: head and body. Start the head at the top feather and work down, it's pretty simple. The body starts at the tail. Remember do glue the legs and wings to it BEFORE closing. The legs are simple, just start at the toes and work by numbers. The wings are built in segments, the instructions on the templates explain how they are supposed to be built. The model might need some weight to stand. Before closing the body, put some weight inside and pop the head until it stands, when it does, close the body and glue the head to it.
Both the textures for Male and Female variants are included, with the Male textures used for non-shiny PDFs and the Female textures used for shiny PDFs.

download

EXPLOUD - Pokémon Papercraft

Name: Exploud
Type: Normal
Species: Loud Noise Pokémon
Height: 1.5 m (4'11")
Weight: 84.0 kg (185.2 lbs.)
Interesting Facts: Exploud is a large blue bipedal Pokémon with a large mouth. It has two peg-like teeth on each jaw. It has protruding tubes with holes along its body: seven along the crest on its head, four on its elbows and knees, two along its back, and two on the end of its two tails. Exploud's bellowing is capable of triggering earthquakes and can be heard from over six miles away. It only raises its voice when it is in battle. It communicates its feelings to others by producing whistle-like sounds. It lives in caves.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 15.7 cm/ 6.2 in
Depth: 17.6 cm/6.9 in
No. of Pages: 5
No. of Pieces: 42
Level: Medium
NOTES: Start at the top of the head, build the tubes first and the face around them. The mouth is glued after the first piece of the back is glued. Glue pieces 17 and 20 to the arms after the first segments of pieces 16 and 19 are built. The parts under the mouth (22 and 23) can get tricky, start them at the bottom of the lips. Close at the tip of the tails.

download

PELIPPER

PELIPPER - Pokémon Papercraft
Name: Pelipper
Type: Water/Flying
Species: Water Bird Pokémon
Height: 1.2 m (3'11")
Weight: 28.0 kg (61.7 lbs.)
Interesting Facts: Pelipper is a pelican-like Pokémon with no discernible neck. Its head and bill make up the majority of its body. It has white feathers, a yellow underbelly, and a blue head crest. Its large wings have three digits and blue wing tips. It has small, blue webbed feet, a short tail, and eyes that are made of two black semi-circles. It has a large bill and a throat pouch that it uses to carry small Pokémon and eggs and scoop food from the sea. It searches for food by skimming across the wave tops. After scooping the food, Pelipper swallows it in one big gulp. It builds its nest on steep cliffs facing the sea.

THE PAPER MODEL
Height: 14.2 cm/5.6 in
Width: 19.6 cm/ 7.7 in
Depth: 22.9 cm/9.0 in
No. of Pages: 7
No. of Pieces: 34
Level: Easy/Medium
NOTES: Start at the top of the head and close at the tip of the tail. Be sure to build the entire mouth before gluing it to the face. The wings are the only hard part, but as long as you fold the lines indicated in red it will build fairly simply. When gluing the feet, place the left wing on a flat surface and glue the feet on the same level so it stands better. You can use magnets to hold the bill instead of gluing it (to make it into a storage container of sorts), just place one inside the bill before closing and glue one to the place where it connects to the body.

download

Tony Start papercraft part 3

This Tony Start papercraft / paper figure template was submitted by Saurabh Jethani. He wanted his work to be hosted in paper-replika.com. The reason was, he thought Tony's papercraft should be in the same site as other Iron Man papercrafts. So Iron Man fan can download it and build it for free. He shared the template in 2 pdo files, one with lines and the other is without lines. You can open this template using Pepakura Viewer, as you may know pdo file can be a pattern and an assembly instructions at once, so there are no graphic image instructions as usual.  This is part is only a beginning, the leg will be added soon after he finished preparing the rest of the part.

download part 3

Tony Stark Papercraft part 2

This Tony Start papercraft / paper figure template was submitted by Saurabh Jethani. He wanted his work to be hosted in paper-replika.com. The reason was, he thought Tony's papercraft should be in the same site as other Iron Man papercrafts. So Iron Man fan can download it and build it for free. He shared the template in 2 pdo files, one with lines and the other is without lines. You can open this template using Pepakura Viewer, as you may know pdo file can be a pattern and an assembly instructions at once, so there are no graphic image instructions as usual.  This is part is only a beginning, the leg will be added soon after he finished preparing the rest of the part 2.

download part 2

Tony Stark Paper part 1

This Tony Start papercraft / paper figure template was submitted by Saurabh Jethani. He wanted his work to be hosted in paper-replika.com. The reason was, he thought Tony's papercraft should be in the same site as other Iron Man papercrafts. So Iron Man fan can download it and build it for free. He shared the template in 2 pdo files, one with lines and the other is without lines. You can open this template using Pepakura Viewer, as you may know pdo file can be a pattern and an assembly instructions at once, so there are no graphic image instructions as usual.  This is part is only a beginning, the leg will be added soon after he finished preparing the rest of the part.

download part 1