MAMOSWINE

473 / Mamoswine - Pokémon Papercraft
Name: Mamoswine
Type: Ice/Ground
Species: Twin Tusk Pokémon
Height: 2.5 m (8'02")
Weight: 291.0 kg (641.5 lbs)
Interesting Facts: Mamoswine are incredibly strong. Their sturdy body and feet enable them to cross even the most dense and dry snow. Mamoswine are able to endure harsh cold and hunger for an almost indefinite amount of time, as indicated by a ten-thousand-year-old specimen waking up, much to the amazement of those who discovered it.

THE PAPER MODEL
Height: 15.0 cm/ 5.9 in
Width: 14.5 cm/ 5.7 in
Depth: 24.0 cm/ 9.5 in
No. of Pages: 6
Level: Easy/Medium

NOTES: Start at the front of the head, close at the back legs. Attach the face and tusks using the texture shadows and picture as reference. Refer to part numbers for any additional help. Try to apply pressure from the inside when attaching parts to the body.

Download

Finn (and Jake) Adventure Time Papercraft

Name: Finn
Type: Human
Interesting Facts: April Fool's model for 2012! I wish you liked it. We might begin to become a bit too predictable, we'll have to find something else next year instead of changing the title :P We'll see...

THE PAPER MODEL
Height: 16 cm / x.x in
Width: 6.5 cm / x.x in
Depth: 6.1 cm / x.x in
Pages: 2
Pieces: 27
Level: It's alright

NOTES: It was kinda quickly made, job kinda took toll on me lately. I was going to make Jake too but well, he's still there :P
All the parts are pretty much "glued-on" so you can pose him anyway you want. Fun one!

DOWNLOAD

CRYOGONAL - Pokémon Papercraft

Name: Cryogonal
Type: Ice
Species: CrystallizingPokémon
Height: 1.1 m (3′07″)
Weight: 148.0 kg (326.3 lbs.)
Interesting Facts: Cryogonal resembles a shiny, blue hexagonal snowflake. Its facial expression is frozen, which leaves Cryogonal with a still, aggressive-looking face. Two cracks run through its face, the upper opening contains its eyes and the lower serves as a mouth. It has two glowing eyes and its large mouth contains an extendable chain of ice, which is used for hunting. When its body heat rises it will turn into steam and vanish, but will revert back to ice when the body temperature lowers. Cryogonal is born in snow clouds.

THE PAPER MODEL
Height: 13.0 cm/ 5.1 in
Width: 12.6 cm/ 5.0 in
Depth: 2.5 cm/ 1.0 in
Pages: 2
Pieces: 26
Level: Easy

NOTES: Start at the eyes and build by numbers around it. Glue the appendages as soon as the numbers get to them. Close at the back.

DOWNLOAD 

Palkia - Pokémon Papercraft

Name: Palkia
Type: Water/Dragon
Species: Spatial Pokémon
Height: 4.2 m (13'09")
Weight: 336.0 kg (740.8 lbs)
Interesting Facts: Palkia appeared in the first three Diamond & Pearl series Pokémon movies. It was first shown in The Rise of Darkrai, where it fought with Dialga and Darkrai in a battle that nearly destroyed Alamos Town. It was shown in a flashback in Giratina and the Sky Warrior. Palkia's final movie appearance was in Arceus and the Jewel of Life. It was shown for the first time with both the other members of its trio, and started a battle with them which awoke Arceus.

THE PAPER MODEL
Height: 22.7 cm/ 8.9 in
Width: 24.0 cm/ 9.4 in
Depth: 27.3 cm/ 10.7 in
No. of Pages: 12
Level: Hard

NOTES:  Start the model at the head. The fold lines for this part are indicated in blue lines, it's necessary to fold them in order to give the head and neck a proper shape. You can either glue the wings when indicated by numbers or after the arms are glued, use a drop of glue on the side they meet the body. The arms are built from the hands up, you must glue the arm plates before going any further, they need pressure from the inside. The shoulders are simple and there are references on where to glue the shoulder plates. Join the arm and the shoulder BEFORE closing the arm. The arm can be rotated and glued on another position besides the one on the picture. The legs are built from the feet up. I recommend reinforcing them from the inside, so as the middle of the body. The model is closed at the tip of the tail. The stripes must be glued BEFORE closing, while you can apply pressure from the inside, if you follow the numbers you'll be able to do so.

DOWNLOAD

DODRIO - Pokémon Papercraft

Name: Dodrio
Type: Normal/Flying
Species: Triple Bird Pokémon
Height: 1.8 m (5'11")
Weight: 85.2 kg (187.8 lbs.)
Interesting Facts: Along with its three heads, Dodrio has three sets of hearts and lungs as well. This allows it to efficiently oxygenate and pump blood throughout its body, thus giving it increased endurance to run vast distances without rest. It is especially prone to race vigorously across grassy plains, even in arid seasons with little rainfall.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 15.1 cm/ 5.9 in
Depth: 14.1 cm/5.6 in
No. of Pages: 3
No. of Pieces: 76
Level: Medium-Hard

NOTES: There are two start points: the heads and the legs. After both segments are done, join them with the indicated piece. The beaks can offer some trouble, take your time there. For a smoother build it's suggested to fold the indicated lines. After the model is closed, glue the tail. The head details can be glued after the heads are connected to the torso. The necks and the legs might break with time, some reinforcement is suggested, such as a thin wire on the necks and a thicker one for the legs or some stripes of paper inserted in them. The model won't stand on it's own, in order to do that you can use a base.

There are also textures included for both the apricot colored neck (female) and darker neck (male). The default is female, Pepakura Viewer is needed to use the male textures.

DOWNLOAD

STARAPTOR - Pokémon Papercraft

Name: Staraptor
Type: Normal/Flying
Species: Predator Pokémon
Height: 1.2 m (3'11")
Weight: 24.9 kg (54.9 lbs.)
Interesting Facts: Staraptor is a grayish-brown, avian Pokémon similar to a large bird of prey. It has small, red eyes and a thin, yellow beak with a black tip. There is a circular white patch on its forehead, which is smaller on the female. Larger white markings cover the front of its throat and chest, separated by a black ruff encircling the shoulders. A red-tipped, black crest extends over its head, nearly reaching the tip of its beak.

THE PAPER MODEL
Height: 20.6 cm/8.1 in
Width: 18.5 cm/7.3 in
Depth: 30.2 cm/11.9 in
No. of Pages: 6
No. of Pieces: 56
Level: Hard

NOTES: The model is built in two main parts: head and body. Start the head at the top feather and work down. The body starts at the tail, which is pretty hard to build. Fold the indicated lines and take your time there. Remember do glue the legs and wings to the body BEFORE closing. Start the legs at the claws and work by numbers, reinforce them from the inside, the model is pretty heavy. The wings are built in segments, the instructions on the templates explain how they are supposed to be built. The model needs weight to stand. I create a pocked inside the body to counterbalance it, reference pictures and instructions are added on the pack and on the template. Add the weight inside and pop the head until it stands, when it does, close the body and glue the head to it. Further instructions added on the template.

DOWNLOAD

TOGEKISS - Pokémon Papercraft

Name: Togekiss
Type: Fairy/Flying
Species: Jubilee Pokémon
Height: 1.5 m (4'11")
Weight: 38.0 kg (83.8 lbs.)
Interesting Facts: Togekiss is a white, avian Pokémon with an ovoid body. While its feet are small and situated closely together, its wings are broad and triangular. Red and blue triangular markings over its underside, and it has a short tail consisting of three feathers. On the back of its head are three spikes: a red tipped on the right, a blue tipped one on the left, and a pure white one in the middle. Togekiss has a relatively flat face and small, black eyes. This Pokémon is rarely seen, only appearing in peaceful areas. When it is seen or visits respectful people, it showers gifts of blessings and kindness.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 29.9 cm/11.8 in
Depth: 19.7 cm/7.8 in
No. of Pages: 7
No. of Pieces: 75
Level: Medium

NOTES: Start the model at the top of the head, follow the numbers and the istructions and close at the tail. The only part that can offer some trouble on this one is joining the wings with the body, since they are quite big. If you glue the two first chest pieces to it, will make it easier. It stands on it's own, just be careful while placing the feet so they match the pdo and the picture. If it won't stand, add some weight, there should be an opening, since the tail should be only glued after it's standing. To finish it, glue the feathers.

About the wings, up until a point (12), the build with both the wings is the same, after that, if you want the wings as shown on the picture, follow the red numbers, if you want the ones as shown on the pdo, use the black number.

DOWNLOAD